ST6 Detailers · Headlight Restoration
Headlight Restoration Done the Right Way.
Restore cloudy, yellowed and oxidized headlights with professional sanding, refinishing and ceramic protection. We don't polish over the damage — we remove it, restore the lens, and protect the finished result.
$ $99.99
✓ 2-Year Warranty
● Ceramic Protection Included
● Real Before & After Results
★★★★★
400+ Five-Star Reviews
See the Difference
Cloudy and oxidized. Then fully restored.
Real ST6 results. A quick polish can temporarily improve appearance, but it doesn't remove years of UV and oxidation damage the way a full restoration does.
Before
After
Same headlight, same vehicle. The exterior surface was sanded away, refined, polished, and protected with ceramic coating — not simply buffed.
Headlight Restoration
Restore your headlights for $99.99
🛡 2-Year Warranty
✨ Ceramic Protection Included
✂ Professional Sanding & Refinishing
Professional sanding, refinishing, and ceramic protection — not a quick polish. Backed by a 2-year warranty.
Why It Happens
Why headlights become cloudy.
Modern headlight lenses are polycarbonate plastic with a thin protective coating. Years of exposure wear that coating down.
UV & Weather Exposure
Years of UV radiation, heat, and Colorado weather break down the lens's protective coating, leaving the plastic underneath exposed.
Road Contamination & Chemicals
Road debris, chemicals, and repeated washing gradually wear the exterior surface, leading to yellowing, haze, and dullness.
Polishing Alone Isn't Enough
A quick polish can temporarily improve the look of light oxidation, but it doesn't address significant deterioration. The damaged layer has to be removed and the new surface protected — not just buffed shiny.
The ST6 Restoration Process
We don't polish over the damage. We remove it.
Five steps, every time. Not a quick buff — a full restoration of the lens surface.
Step 1
Inspection
We inspect the headlights to determine the extent of oxidation, UV deterioration, hazing, and surface damage.
Step 2
Professional Sanding
The deteriorated exterior surface is progressively sanded away. We're not polishing over oxidation — we remove the damaged surface.
Step 3
Refinement & Polishing
The lens is progressively refined and polished to remove sanding marks and restore optical clarity.
Step 4
Ceramic Protection
The restored surface is protected with a professional ceramic coating against UV exposure, contamination, and environmental deterioration.
Step 5
Final Inspection
The restored headlights are inspected for clarity and finish before the vehicle is returned to you.
Why Ceramic Protection Matters
Restored, then protected.
20+ Years of Experience. Professionally Trained. Gtechniq Accredited.
Once the deteriorated exterior surface has been removed, leaving the freshly restored plastic unprotected would make little sense. ST6 applies professional ceramic protection to the finished lens — the same Gtechniq-accredited standard we use on vehicle paint — to help preserve the clarity we just restored.
×
ST6 DETAILERS
UV
UV Resistance
Ceramic protection helps shield the restored lens from the same UV exposure that caused the original oxidation.
Easier Cleaning
A ceramic-protected surface sheds water, dirt, and road grime more easily than bare restored plastic.
Contamination Resistance
Helps resist road film, chemicals, and environmental buildup that would otherwise attack the freshly restored surface.
Longer-Lasting Clarity
Protecting the restored surface helps the clarity last — not a claim that the lens becomes indestructible, but a meaningful improvement in durability.
InspectionSandingRefinementPolishingCeramic ApplicationCureFinal Inspection
Backed by a 2-Year Warranty
We stand behind the restoration.
ST6's headlight restoration is a professional process designed to produce a significantly better and longer-lasting result than a temporary polish. That's why every restoration is backed by a 2-year warranty — this is a durable repair, not a cosmetic add-on.
2-Year
Manufacturer-Grade Warranty
Want Even More Protection?
Optional Headlight PPF.
An additional physical layer of protection for restored headlights, especially valuable for highway-heavy driving.
Ceramic Protects the Surface. PPF Adds a Physical Layer.
Ceramic coating provides surface protection against UV, contamination, and easier cleaning. Paint Protection Film goes further — it's a physical, sacrificial layer installed over the restored headlight, upon request.
- Rock chips
- Road debris
- Sandblasting
- Bug impacts
- Minor physical damage
Not Just Cosmetic
Clarity and light output.
Deteriorated headlights aren't purely about looks.
Reduced Light Output
Cloudy and oxidized lenses can interfere with usable light output, which can reduce nighttime visibility.
Restoring Clarity
Restoring clarity improves the appearance of the vehicle while allowing a properly functioning headlight assembly to perform closer to the way it was designed.
A Complete Fix, Not a Cover-Up
Removing the damaged surface — rather than polishing over it — addresses the actual cause of reduced clarity, not just the appearance.
Restoration vs. Replacement
Often a far more economical solution.
Modern headlight assemblies can be expensive to replace.
Full Assembly Replacement
Depending on the vehicle, replacing complete headlight assemblies can cost hundreds or even thousands of dollars — and doesn't fix a problem that's often just surface-level oxidation.
Professional Restoration
If the housing, electronics, and internal lighting components are still functional, professional restoration at $99.99 may be a far more economical solution than replacement.
Why ST6 Detailers
The same standard we use on your paint.
Headlight restoration is performed by the same team already experienced with paint correction, surface refinement, ceramic coatings, and paint protection.
Surface Refinement Expertise
The same sanding, refinement, and polishing discipline we apply to Paint Correction is applied to the headlight lens.
Ceramic Coating Standard
The ceramic protection applied after restoration is the same Gtechniq-accredited standard we use across our Ceramic Coating packages.
PPF Experience
For customers who want an added physical layer, our Paint Protection Film experience extends to headlight PPF upon request.
Headlight Restoration FAQ
What customers ask before booking.
Clear answers before you request a quote.
How much does headlight restoration cost?
Headlight restoration is $99.99.
How long does headlight restoration take?
Time depends on the condition of the headlights. Because ST6 performs a complete restoration — sanding, refining, polishing, and ceramic protection — rather than rushing through a quick polish, timing is confirmed when you request your quote.
Do you just polish the headlights?
No. ST6 progressively sands away the damaged and oxidized exterior surface, refines and polishes the lens, and then protects the restored surface with ceramic coating.
How long will the restoration last?
Results depend on vehicle use and environmental exposure, but ST6 protects the restored headlights with ceramic coating and backs the service with a 2-year warranty.
Can every headlight be restored?
Many headlights with exterior oxidation, yellowing, and hazing can be dramatically improved. Internal damage, cracking, moisture inside the assembly, or severely damaged lenses may require replacement rather than restoration.
Can you install PPF after restoration?
Yes. Headlight PPF is available upon request for customers who want an additional physical layer of protection.
Headlight Restoration Quote
Tell us about your headlights. We'll send a tailored quote.
Include your vehicle year/make/model and a description of the headlight condition. Online booking isn't available for Headlight Restoration — every job starts with a quote so we can confirm scope before you're on the schedule. Pairs well with an Auto Detailing package on the same visit.
Request DetailsST6 Detailers
Our fully equipped mobile units bring “Special Ops” level restoration directly to your home or office. From deep interior cleaning to professional paint polishing and Gtechniq protection, we handle everything on-site with our own onboard power and water
Contact Us
512 Cooper Ave, Colorado Springs, CO 80905
(719) 517-7220
info@st6detailers.com
Working Hours
Mon - Sat: 8.00 am - 6.00 pm Sunday 8:00 am - 1:00 pm
Copyright © 2026 ST6 DETAILERS. All Rights Reserved.